Answers are grounded in this paper and cite their sources.
We have studied the incidence angle (θ0) dependence of the sea ice backscattering coefficient (0.°) for Sentinel-1 (S-1) extra wide (EW) mode dualpolarization (HH/HV) synthetic aperture radar (SAR) imagery acquired over the Kara Sea under winter and summer melting conditions. The determination of the 0.° versus θ 0 dependence was based on SAR image pairs acquired on ascending and descending orbits over the same sea ice area with a short time difference. The SAR noise floor was subtracted from the HV images. From the image pairs 1.1 by 1.1 km windows representing level first-year ice (LFYI) and deformed first-year ice (DFYI) were manually selected, and a linear regression was fit between the resulting 0.° and θ0 differences of the windows to estimate the slope b 1 (dB/1°) between 0.° and θ0. For example, under winter condition b 1 for DFYI at HHand HV-polarizations was found to be -0.24 and -0.16 dB/1°, respectively, and b 1 for LFYI at HH-polarization was -0.25 dB/1°. It was not possible to determine a reliable b 1 for LFYI at HV due to a contamination effect of the S-1 noise floor. The b 1 values at HH compared well with previous studies. They can be used to compensate the 0.° incidence angle variation in the S-1 EW SAR images with good accuracy. The HH b 1 values are applicable to other S-1 imaging modes and other C-band SAR sensors like RADARSAT-2. Unfortunately, the HV b 1 values are specific to the S-1 EW mode due to the noise floor problem.
No takes yet. Share an insight, caveat, or question.
Mäkynen et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: