Answers are grounded in this paper and cite their sources.
C-S-H samples were precipitated from aqueous solution containing Ca(NO 3 ) 2 and Na 2 SiO 3 with an initial Ca/Si molar ratio of 1·3, when the pH value in the solution was varied by adding HNO 3 or NaOH. A pH > 10·9 was required to obtain quasi-crystalline C-S-H, and the CaO/SiO 2 ratio of the precipitate was increased with increasing pH, reaching a maximum close to the initial ratio at pH > 13. C-S-H was also precipitated with varying initial Ca/Si molar ratios at pH > 13. It was shown that the CaO/SiO 2 ratios can be controlled by either varying the pH value at given initial Ca/Si ratios, or by varying the initial Ca/Si ratios at pH > 13. The C-S-H samples were investigated using X-ray diffraction and 29 Si nuclear magnetic resonance spectroscopy, which identifies the connectivity of silica tetrahedra (Q x ). The interlayer spacing decreased linearly, and Q 1 /(Q 1 + Q 2 + Q 3 ) ratios increased with increasing CaO/SiO 2 ratios. A good correlation between Q 1 /(Q 1 + Q 2 + Q 3 ) ratios and interlayer spacing was observed.
No takes yet. Share an insight, caveat, or question.
Matsuyama et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: