Answers are grounded in this paper and cite their sources.
• The blast loading uncertainty, risky zones and failure probability have been studied. • Due to calculation difficulty, Monte Carlo and Finite Element methods have been used. • Three new software have been developed by using Visual Basic programming. • Probability of failure and explosion at the dam crest is not the critical condition. • The greater blast intensity does not make the greater stresses and failed zones. This paper investigates the impact of uncertain blast load parameters on the stress distribution, failure probability, and failure areas of a RCC dam. It aims to enhance dam safety. Monte Carlo methods with a probabilistic approach are employed, and three software programs developed in Visual Basic are used to calculate the dam's failure and its associated probabilities. The results show that the maximum probabilities of failure increase with blast intensity, ranging from 25% to 100% for TNT equivalents of 10 kg to 100 kg. Average failure probabilities rise with intensity, from 0.6% to 17.6%. Notably, when blasts under 100 kg occur within 50 meters of the dam toe, failure rates are minimal (0% to 0.25%). However, as intensity increases, the failure rate of the dam body can reach 2.8% to 5.5% even at close distances. It can be concluded that the primary cause of dam failure is not an explosion at the dam crest, as higher blast intensity does not consistently lead to increased stress or failure rates. When the blast location remains the same, greater intensity results in more failures. The risk of upstream dam failure increases with blast intensity, peaking in a layer about 5 meters thick downstream.
No takes yet. Share an insight, caveat, or question.
Tokmechi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: