3D-FRP: direct Fourier reconstruction with Fourier reprojection for fully 3-D PET

This is the authors' abstract. We don't add key points for this paper.

The direct Fourier method (DFM) for three-dimensional (3-D) reconstruction of a 3-D volume is based on the relationship between the 3-D Fourier transform (FT) of the volume and the two-dimensional (2-D) FT of a parallel-ray projection of the volume. The direct Fourier method has the potential for very fast reconstruction, but a straightforward implementation of the method leads to unsatisfactory results. This paper presents an implementation of the direct Fourier method for fully 3-D positron emission tomography (PET) data with incomplete oblique projections (3D-FRP) that gives results as good as, or better than, those of a much slower 3-D filtered backprojection method (3DRP), and in the same time as a fast but less accurate method using Fourier rebinning (FORE) followed by slice-by-slice reconstruction. In common with 3DRP, 3D-FRP is based on a discretization of an inversion formula, so it is geometrically accurate for large oblique angles, and both methods involve reprojection of an initial image. The critical two steps in the 3D-FRP method are the estimations of the samples of the 3-D transform of the image from the samples of the 2-D transforms of the projections on the planes through the origin of Fourier space, and vice versa for reprojection. These steps use a gridding strategy, combined with new approaches for weighting in the transform and image domains. The authors' experimental results confirm that good image accuracy can be achieved together with a short reconstruction time.