Answers are grounded in this paper and cite their sources.
An apparatus is described for investigating critical potentials in the emission of secondary electrons from tungsten. Measurements on the velocity distribution in the primary beam show that secondary electrons from the electron gun are absent. Tube characteristics which might introduce spurious critical potentials in the secondary emission from tungsten appear to be absent. By heat treating the tungsten and cleaning up residual gases, maxima and critical slope changes were developed below 40 volts. With sensitive methods of measuring and plotting the data, critical potentials within the range from 40 to 500 volts were observed only at the following uncorrected voltages; 70, 108, 208, 297 volts. All but the 70 volt effect disappeared eventually after heat treatments of the tungsten target. Thus when the tungsten surface is most free from contamination, critical potentials persisted only at the following uncorrected voltages; maxima at about 3.5 and 8 volts and slope increases at 24, 33 and 70 volts. The phenomena may be associated with the diffraction of electrons or the production and absorption of characteristic soft x-rays. Regardless of the mechanism operating at the critical potentials, their decrease or elimination beyond 40 volts points strongly to effects of surface contamination rather than to characteristics of tungsten.
No takes yet. Share an insight, caveat, or question.
A. J. Ahearn (1931) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: