Answers are grounded in this paper and cite their sources.
The electrochemical conversion of captured CO 2 – also known as reactive capture – offers a promising approach to produce renewable carbon monoxide (CO) while bypass the energy and cost-intensive CO 2 capture, purification and pressurization processes at large scale. However, current reactive capture systems suffer from low CO selectivity (< 50%) and productivity (< 100 mA cm⁻ 2 ) due to the lack of efficient electrocatalysts and limited CO 2 availability at the reactive interfaces. Here, we develop a coupled catalyst and microenvironment strategy to overcome these barriers. Employing Ni single-atom catalysts with a high density of reactive sites (Ni loading up to 3.0 wt%), together with enhanced CO 2 regeneration and transport to the catalyst via local hydrophobicity control, we achieved efficient CO production with a Faradaic efficiency of 68% at 100 mA cm⁻ 2 with stable performance maintained over 100 hours in a hydroxide-mediated reactive capture system. The system achieved a CO energy efficiency of 27% and an energy intensity of 37.7 GJ ton⁻¹ CO , outperforming the best reported amine- and hydroxide-based reactive capture processes operating at ambient temperature and pressure. • A coupled catalyst and microenvironment strategy is developed to overcome the CO selectivity and productivity trade-off in reactive capture systems. • A CO Faradaic efficiency of 68% is achieved at industrially relevant current density of 100 mA cm⁻ 2 , together with a stable operation of over 100 hours. • The energy efficiency for CO production reaches 27%, equivalent to an energy intensity of 37.7 GJ ton⁻¹ CO .
No takes yet. Share an insight, caveat, or question.
Wang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: