Key points are not available for this paper at this time.
Abstract The aviation industry has set ambitious goals for reducing carbon emissions, with the International Civil Aviation Organization targeting net-zero carbon emissions by 2050. Bio-jet fuel is expected to play a crucial role in achieving this target, and the demand for bio-jet fuel is projected to rapidly increase. Bio-oil from fast pyrolysis of lignin, such as waste wood, is considered a promising alternative for production of bio-jet fuel through processes such as hydrodeoxygenation. In this study, the physical properties and compositions of bio-jet fuel produced from wood-derived pyrolysis bio-oil blended with petroleum-based jet fuel as well as their changes during 16 weeks storage were investigated. Consistently, 0%, 10%, 50%, and 100% blended bio-jet fuels were prepared. After 16 weeks of aging, the total acid number of the all-blended bio-jet fuel showed a sharp increase from 12 weeks, reaching over 0.1 mg KOH/g. Additionally, kinematic viscosity showed a steady increase over 16 weeks whereas oxidative stability decreased by approximately 20% at 16 weeks for the 100% bio-jet fuel alone. The final boiling point increased by up to 20% in higher blends of bio-jet fuel and the average molecular weight increased. Bio-jet fuel has a high olefin content, which can further increase during storage, leading to a decrease in the combustion characteristics. This study suggests that using up to 10% the bio-jet fuel in aircraft is safe considering storage stability, but further research is required to confirm this finding.
Jeon et al. (Fri,) studied this question.