Answers are grounded in this paper and cite their sources.
Atomically thin layered semiconductors such as Molybdenum Sulphide (MoS 2 ) have emerged as potential candidate for trace level detection of chemicals owing to their innate very high surface to volume ratio. Present work focuses on the fabrication of room temperature operated Nitrogen dioxide (NO 2 ) gas sensor exploiting MoS 2 as gas sensing matrix. Three different sensor structures, (i) Au/Cr/single layer MoS 2 /Si 3 N 4 /Si, (ii) Au/Cr/four-layer MoS 2 /Si 3 N 4 /Si, and (iii) Au/Cr/ten-layer MoS 2 /Si 3 N 4 /Si were fabricated and gas sensing measurements were carried out for different NO 2 gas concentrations (1 ppm to 500 ppm). Effect of NO 2 gas adsorption on MoS 2 surface was explained using realignment of energy band diagram. Sensing response (%) for Au/Cr/four-layer MoS 2 /Si 3 N 4 /Si structure was found to be maximum as compared to the case of single layer and ten-layer structure and corresponding sensing mechanism has been investigated in detail. Response and recovery time of fabricated Au/Cr/four-layer MoS 2 /Si 3 N 4 /Si sensor were found to be 24 s and 41 s respectively, and cross selectivity measurements were performed and sensor was found to be highly selective towards NO 2 gas. Present work pave the way to realize the potential of MoS 2 based back gated Field Effect Transistors (FETs) for fabricating highly efficient NO 2 gas sensors.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: