Answers are grounded in this paper and cite their sources.
The objective of this research is to design a sensor system for monitoring the environmental conditions within a building. The environmental parameters being monitored include temperature, humidity, illuminance, carbon dioxide gas levels, dust density, and noise. Temperature and humidity are measured using the DT-Sense Temperature & Humidity Sensor based on the SHT10. Illuminance is measured using the DT-Sense Light Sensor based on the TEMT6000. Carbon dioxide gas levels are detected using the DT-Sense Gas Sensor based on the MG-811. Dust density is assessed with the Sharp GP2Y1010F46 Optical Dust Sensor, and a Microphone Sensor Module based on KY-038 is utilized for noise detection. These sensors are connected to the WiDo-Open Source IoT Node, which acts as a microcontroller. It sends real-time data, which is then displayed on the serial monitor of the Arduino Integrated Development Environment (IDE). The results of testing and calibration of the DT-Sense Temperature & Humidity Sensor showed high linearity with an R2 value close to 1.00, with a temperature range of 8.80°C to 37.90°C and a temperature sensing error of ±0.30°C. The humidity sensing exhibited a mean absolute error (MAE) of 0.12% RH. The DT-Sense Light Sensor provided a high level of linearity (R²=9.98 × 10⁻¹) within an illuminance range of 9.00Lux to 3600.00Lux, with a calibration factor of 0.12 × 10⁻² ~V / Lux. The Sharp GP2Y1010F46 Optical Dust Sensor displayed excellent linearity (R²=9.99 × 10⁻¹) with a sensitivity of 5.91 ~V /(mg / m³). The Microphone Sensor Module for noise detection demonstrated strong linearity (R²=9.96 × 10⁻. ¹), a calibration factor of 3.50 mV / dB, and a mean absolute error of 1.46 ~dB. However, it is worth noting that the DT-Sense Gas Sensor used for carbon dioxide detection showed some output anomalies.
No takes yet. Share an insight, caveat, or question.
Saputri et al. (2023) studied this question.