Answers are grounded in this paper and cite their sources.
Accounting for over 40% of global waste, the construction industry needs innovative approaches to reduce its environmental impact. Excavation soil is currently considered waste and disposed of in landfills, accounting for about five times household waste and being the most significant source by volume. However, 80% of the extracted soil from construction sites is estimated to be uncontaminated and could be reused. In parallel, 3D printing of concrete structures with non-standard geometry is still limited by complicated processes, which are challenging to upscale and be used for on-site construction scenarios. This project proactively explores terrain as a resource for automated construction, specifically using unprocessed soil as a reconfigurable moulding material for on-site 3D printing of geometrically complex concrete elements. To do so, a novel robotic process was developed and tested in a laboratory environment, combining high-precision robotic earthwork and 3D printing aided by camera vision to account for the unpredictable behaviour of soil with unknown composition and properties. The method was tested on a proof-of-concept experiment where concrete shell panels of topological complexity were successfully realised, extending the available design space for large-scale 3DCP with a reconfigurable, sustainable and low-cost approach.
No takes yet. Share an insight, caveat, or question.
Breseghello et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: