INT-Source: Topology-Adaptive In-Band Network-Wide Telemetry

In-band Network Telemetry (INT) technology enables fine-grained network monitoring by encapsulating intra-switch network status into INT probes, which is essential in data center networks for ensuring Quality of Service (QoS). Existing INT-based telemetry systems leverage centralized controllers to compute non-overlapping probe paths, thereby facilitating lightweight and network-wide measurements. However, these systems fail to adapt effectively to network topology changes caused by link or device failures, primarily due to inflexible path planning under dynamic conditions. To address this problem, we propose INT-Source, a unified policy-based network-wide telemetry system for probing and forwarding. First, we design a data plane forwarding mechanism for INT probes to ensure telemetry coverage during topology changes and reduce telemetry overhead. Second, we design a probe packet structure and introduce a switch-based probe verification and discard mechanism to prevent redundant link probing. Third, we introduce two algorithms for INT-Source: a Single-Source algorithm to facilitate deployment and a Multi-Source algorithm to enable lightweight and scalable telemetry. Our evaluation shows that INT-Source reduces bandwidth overhead to 12.5% compared to existing methods across three network topologies. Even with a 10% link failure rate, INT-Source is able to monitor 93.1% of network ports, demonstrating strong robustness.