This is the authors' abstract. We don't add key points for this paper.
Pt/Ni thin-film electrodes were fabricated by e-beam evaporation of metal layers and rapid thermal annealing (RTA), to achieve alloy formation between the Pt and Ni layers. The structural, chemical, and electronic properties of thin-film electrodes annealed at 200, 300, and 500 °C were classified as follows: Pt-dominant (as-Pt/Ni or 200 °C Pt/Ni), Pt-based (300 °C Pt/Ni), and Ni-dominant (500 °C Pt/Ni). These Pt/Ni thin-film electrodes were matched well with Pt/Ni(3:1), -(1:1), and -(1:3) nanoparticles synthesized by borohydride reduction, for use in methanol electrooxidation in a direct methanol fuel cell. The characteristics of the thin-films and nanoparticles were correlated using X-ray diffraction analysis, Auger electron spectroscopy, X-ray photoelectron spectroscopy, and electrochemical measurements. The modified electronic properties of platinum in Pt/Ni alloy electrodes as well as a higher catalytic activity for methanol electrooxidation could be attributed to the surface and bulk structure of Pt/Ni alloys with a proper composition such as 300 °C Pt/Ni thin-film electrode and Pt/Ni(1:1) nanoparticle. The possibility that electrodes designed by thin-film processing such as by means of an e-beam evaporator and RTA system could be used in a systematic approach to the characterization of alloy nanoparticles is discussed.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Park et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: