Key points are not available for this paper at this time.
For performance evaluation of buildings and structures, synthetic uniform hazard (10% and 2% in 50 years) ground motions are generated for Memphis, Tennessee, St. Louis, Missouri, and Carbondale, Illinois. The method of simulation is based on the latest regional seismic information and stochastic ground motion models. Both point‐source model and finite‐fault model are used and the effects of soil profile are considered. The emphasis is on treatment of uncertainty and efficiency in application to evaluation of structural performance in both the linear and nonlinear range. The results show that the uniform hazard response spectra calculated from the simulated motions are comparable to those corresponding to USGS hazard maps. The suites of ten ground motions selected to match the uniform hazard response spectra represent events of different magnitudes, distances, and attenuation. The median value of the structural response to the selected ground motions matches closely the uniform hazard linear and nonlinear response spectra based on nine thousand ground motions and has a coefficient of variation of less than 10%. The suites of uniform hazard ground motions therefore can be used in probabilistic performance evaluation with good accuracy and efficiency.
Wen et al. (Tue,) studied this question.