Key points are not available for this paper at this time.
Landslides are destructive to property, infrastructure and people in potential landslide zones. Identifying potential landslides is an important step in landslide preparedness and will help develop sustainable landslide risk management. Interferometric synthetic aperture radar (InSAR) and landslide susceptibility assessment (LSA) have poor reliability in individually identifying potential landslide zones. This study proposes a threshold model for identifying potential landslide zones that fuses the InSAR two-dimensional (vertical direction and east-west direction) deformation rates and LSA results. The deformation rate threshold for this threshold model is |DU| or |DE|>10 mm/year (DU and DE are the vertical and the east-west deformation rates, respectively), with threshold levels of LSA set to high and very high susceptibility. The criterion of potential landslide zones is ((|DU| or |DE|>10 mm/year) ∩ (high or very high susceptibility of LSA)), and points with similar deformation and susceptibility are clustered by the K-means algorithm, and the potential landslide zones are obtained by elimination, smooth and speckle removal operations. The results showed that the InSAR two-dimensional deformation rates DU and DE were −32.71 − 12.72 mm/year and −14.88 − 24.81 mm/year, respectively, during 2015–2020 in Lanzhou city. The LSA showed that very low, low, medium, high, and very high susceptibility accounted for 55.36%, 10.54%, 21.37%, 9.63%, 3.1% of the total area, respectively. Using the proposed threshold model, 117 potential landslide zones were identified in Lanzhou. The overlap rate between potential landslide zones and the landslide inventory was 40.17%, indicating that about 40% of the potential landslide zones overlapped with the landslide inventory and that about 60% were new potential landslide zones in Lanzhou. The feasibility of the threshold model in identifying potential landslides was confirmed by field research and time-series InSAR analysis on typical areas (L1, L2, L3, and L4), which had large deformation variables and landslide features. The proposed method can quickly determine the spatial location of potential landslides, providing targeting data for landslide field investigations, technical support for rapid early landslide identification, and data support for landslide management and prevention in Lanzhou.
He et al. (Mon,) studied this question.