Answers are grounded in this paper and cite their sources.
In order to improve the fatigue properties of SCM435H steel, a surface treatment system was developed that combines high-frequency induction heating (IH) with fine particle peening (FPP). In this IH-FPP system, a compressed air spray from the FPP nozzle rapidly cools the specimen surface, which is pre-heated by the IH system. The specimen surface can be simultaneously modified by plastic deformation and quenching. The IH-FPP process was performed at temperatures ranging from 400-750°C. Vickers hardness and residual stress distributions were measured in order to examine the characteristics of the surface-modified layer created by the developed process. Surface microstructures were also observed using an optical microscope. As a result, the developed processes from 650-750°C created a surface with a high hardness and an extremely fine-grained microstructure. The fine-grained microstructure was created due to dynamic recrystallization. In order to clarify the effects of the IH-FPP treatment on fatigue strength of notched SCM435H steel with a stress concentration factor of Kt = 2.36, fatigue tests were performed at room temperature using a rotational bending fatigue testing machine. The specimen treated by IH-FPP process at 700°C exhibited the highest fatigue strength. This was because micro crack initiation and propagation were inhibited by the surface modified layer with high hardness and fine-grain. This result suggests that the IH-FPP treatment process is highly effective in improving the fatigue strength of steel.
No takes yet. Share an insight, caveat, or question.
HARADA et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: