Key points are not available for this paper at this time.
This paper presents a sliding-mode control (SMC) scheme via multiresonant sliding surface for single-phase grid-connected voltage source inverter with an LCL filter to eliminate the grid current tracking error as well as suppress its total harmonic distortion (THD). In general, the design of SMC leads to a sliding surface that is a linear combination of the system state variables and the generated references. The sliding surface would drift while the system parameters change or external disturbance exists, which affects the tracking error and THD of system output seriously. Moreover, for ac tracking system, integral SMC can reduce, but not fully alleviate the sinusoidal tracking error and has limited ability to suppress the grid current harmonics, especially for high-order harmonics. In order to fully eliminate the grid current tracking error and suppress its THD effectively, multiple resonant terms of the grid current error are added to the sliding function. It is used for the first time in the SMC. This method can be used for an arbitrary ac tracking system. Simulation and experimental results on a 5-kVA single-phase grid-connected inverter prototype show the effectiveness of the proposed control strategy. The tracking precision of the grid current is about 0.91% and the THD of the grid current is 0.76%.
Hao et al. (Mon,) studied this question.