Key points are not available for this paper at this time.
A novel direct torque control method for an induction motor is presented which is quite different from field-oriented control. Improving the torque response of a large-capacity induction motor using two sets of three-phase inverters and an open-data induction motor is of special concern. Instantaneous voltage vectors applied by an inverter have redundancy characteristics which provide some flexibility for selecting the inverter switching modes. By using this switching freedom, control is achieved according to the following priorities: (1) high-speed torque control; (2) regulation of the primary flux; (3) decreasing the zero phase sequence current; and (4) minimization of the inverter switching frequency. Simulations and experiments have been carried out to verify the feasibility of this priority control, accompanied by comparisons with another control scheme. Torque frequency-response corner frequencies above 2000 Hz have been experimentally measured, and time constants of 4 ms have been achieved for rotor-speed step responses from -500 to 500 r/min. The peak transient torque during the step change is about 20 times the rate torque.>
Takahashi et al. (Sun,) studied this question.