Answers are grounded in this paper and cite their sources.
Demonstrates myoelectric control performance in bionic limbs, indicating a new interface design with improved comfort.
Bionic limbs require reliable, low-noise and high-comfort interfaces between electrodes and the prosthetic system. This work presents the first fully flexible, wearable myoelectric control system compatible with both dry and wet electrodes. It features a low-noise front-end circuit on foil using amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) Thin-Film Transistors, optimized for multi-electrode sensing. The design includes an autozeroed pre-charging buffer to minimize offset and 1/f noise while maintaining high input impedance (841 MΩ at 50 Hz). The front-end achieves 22 µVrms input noise, < −90 dBc crosstalk, and a 4.6 mV input offset consuming 55.3 µW per channel. EMG signals measured by this AFE were used to drive an elbow musculoskeletal model and predict the resulting human elbow flexion-extension moments, which in turn were used to realize a closed-loop real-time control in a simulated bionic elbow joint, using both dry and wet electrodes. Experiments done with a series of movements show a 20°rms error in angular control.
No takes yet. Share an insight, caveat, or question.
Oosterhout et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: