Answers are grounded in this paper and cite their sources.
The integration of plug-in electric vehicles (PEVs) to the conventional distribution system has had a major impact upon consumption of energy in the past year. This paper presents optimal distributed generator (DG) sizing and location in the power system using PEVs load demand probability. The MATLAB m-file scripts and OpenDSS were applied to solve the proposed study by varying the percentage penetration level of PEVs. A genetic algorithm optimization technique was used to find the best solution of DG installation. The simulation results showed thatthe PEVs were directly connected to the power grid with 100 PEVs (13.84%), 200 PEVs (27.68%) and 500 PEVs (69.19%), respectively. It was found that the DG sizing also varied with 1.773 MW, 1.663 MW and 1.996 MW, respectively. While the position of the DG also changes according to the sizing of DG. The position of DG was installed at bus No.738, bus No.741 and bus No.711, respectively. Therefore, the optimal DG placement helped to improve and reduce the total line loss and total energy demand from the power grid. The grid increased the power system stability and reduced the impact from the large scale of PEV penetration.
No takes yet. Share an insight, caveat, or question.
Kongjeen et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: