Answers are grounded in this paper and cite their sources.
A simplified weighing lysimeter applicable to both monolithic and reconstructed soils was developed andtested in two lysimeters installed at Ismailia, Egypt and one installed at Bushland, Texas, USA. A monolithic lysimeterwas used to measure reference grass evapotranspiration (ET) at Bushland because the dense subsoil and calcic horizon ofthe clay loam soil cannot be reconstructed. The desert sand at Ismailia allowed the use of reconstructed soils formeasuring reference ET of alfalfa and ET of field crops. The main lysimeter components are the concrete foundation, deckscale, soil tank and enclosure consisting of a base, a tank and a top. The steel soil tank and enclosure are shop-fabricated,and the scale is commercially available. Field construction consists mainly of excavation, collection of the soil monolith,if needed, and installation of the concrete foundation. Field calibration of the Bushland lysimeter over a 214-mm(8.43 in.) ET range resulted in sy/x = 0.1 mm (0.004 in.) and r2 = 0.9999. Similar calibration of one of the Ismailialysimeters over an 80-mm (3.2-in.) ET range resulted in sy/x = 0.02 mm (0.0008 in.) and r2 = 0.9999. In initial tests, theKimberly-Penman equation overestimated grass reference ET, and the Penman-Monteith equation slightly underestimatedgrass reference ET for the Bushland environment. Hourly grass ET measured with the Bushland lysimeter agreed closelywith hourly grass ET calculated by the 1963 Penman equation.
No takes yet. Share an insight, caveat, or question.
Schneider et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: