Answers are grounded in this paper and cite their sources.
Demonstrates improved nitrate reduction in water using Co3O4 electrodes, indicating effective ammonia recovery.
A binder-free Co3O4 nanoneedle electrode grown directly on nickel foam (Co3O4@NF) was fabricated by hydrothermal synthesis followed by calcination and evaluated for electrocatalytic nitrate reduction to ammonium. The integrated three-dimensional architecture combines the catalytic activity of Co3O4 with the high conductivity and open porosity of nickel foam, thus exposing abundant active sites, shortening electron-transfer pathways, and facilitating mass transport. Among the electrodes prepared at different calcination temperatures, Co3O4@NF calcined at 400 °C delivered the best performance. Under the optimal conditions of −1.4 V vs. Ag/AgCl, pH 7, and an initial NO3−-N concentration of 50 mg L−1, the electrode achieved 83.4% nitrate removal within 480 min together with 98.7% ammonium selectivity. Electrochemical measurements revealed a markedly enlarged electrochemically active surface area and reduced charge-transfer resistance after Co3O4 loading. Mechanistic analyses via TBA quenching experiments and DFT calculations revealed that both the direct pathway and the hydrogen-assisted indirect pathway were operative, with the indirect pathway being dominant due to its lower free energy barrier while maintaining negligible nitrite accumulation. The electrode also showed good cycling stability and retained high ammonium selectivity in real water matrices. These results demonstrate that binder-free Co3O4 nanoneedles supported on nickel foam constitute a promising cathode architecture for coupling nitrate removal with ammonia recovery.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: