Answers are grounded in this paper and cite their sources.
Reduced-order framework describes nozzle outlet states under gravity changes, indicating implications for design.
A reduced-order framework was developed to describe the outlet initial conditions of a pressure-swirl nozzle under reduced-gravity conditions and to clarify how gravity modifies the nozzle-exit state relative to the corresponding 1 g baseline. Under normal gravity, the baseline outlet state was established through CFD-informed identification of the discharge coefficient and initial spray cone angle, from which the outlet axial and tangential velocity components were reconstructed. Gravity-induced deviations were then introduced through compact correction relationships for the outlet descriptors and liquid-film geometry. The outlet parameters were evaluated over pressure drops of 0.1–0.5 MPa and gravity levels from 1 g to 10−5 g. The results indicate that operating pressure mainly determines the baseline outlet state, whereas reduced gravity acts primarily as a correction to that baseline. Under forward-gravity injection, decreasing gravity reduces the axial and tangential velocity components, discharge coefficient, and initial spray cone angle, while increasing the outlet liquid-film thickness. A CFD-based comparison at 0.3 MPa indicates that the framework captures the first-order trends of normalized outlet velocity components and liquid-film thickness within the investigated conditions. Independent experimental validation is not included in this study and remains necessary for future quantitative assessment.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: