Voltage feedback flux-weakening control has the advantages of simplicity and robustness against parameter variation. However, due to less voltage control margin in the flux-weakening region, the increased feedback voltage ripple could deteriorate the system performance in the flux-weakening region and may even cause oscillation. In this article, based on a nonsalient permanent magnet synchronous machine, the steady-state feedback voltage ripple in the flux-weakening region are analyzed first. It shows that the feedback voltage ripple caused by the current command ripple could dominate in some flux-weakening regions. Consequently, the speed bandwidth based on the conventional speed proportional-integral (PI) controller in the flux-weakening region can be hardly increased, which leads to poor dynamic performance. In order to obtain both fast speed dynamics and less steady-state ripple, especially in the flux-weakening region, an adaptive fuzzy logic (FLC) speed controller is designed and compared with the conventional speed PI controller. With the adaptive FLC, the dc-link voltage utilization can be increased and better flux-weakening capability can be obtained. Finally, the improved performances are verified by the experimental results.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2020) studied this question.
Synapse has enriched 4 closely related papers on similar clinical questions. Consider them for comparative context: