Key points are not available for this paper at this time.
Hexavalent chromium in Portland cement poses significant health risks and contributes to environmental pollution. Traditional reduction methods rely on costly, resource-intensive reducing agents derived from primary raw materials. This study presents a sustainable approach by synthesising ferrous sulfate from industrial iron-rich sludges and waste sulfuric acid to mitigate hexavalent chromium levels in Portland cement. Three types of iron-rich sludges, sourced from municipal wastewater treatment and steel manufacturing, were analysed using X-ray diffraction to identify their iron-bearing phases. Key parameters, including sludge grinding intensity, stirring rate, reaction time and temperature, were systematically optimised to enhance ferrous sulfate yields. Under optimal conditions, approximately 17 g of pure ferrous sulfate were produced from 10 g of sludge and 50 ml of 20% waste sulfuric acid, achieving a recycling efficiency of around 90%. Incorporating the synthesised ferrous sulfate into ordinary Portland cement reduced hexavalent chromium concentrations below 2 ppm, complying with Environmental Protection Agency, USA standards. This method demonstrates the feasibility of repurposing industrial waste to enhance cement’s environmental performance, offering a promising valorisation pathway for iron-rich sludges and waste acids. The approach is cost-effective and environmentally friendly, aligning with circular economic principles and promoting green innovations in industrial waste management.
Mend et al. (Mon,) studied this question.