Key points are not available for this paper at this time.
The symmetric capacitor-inductor-inductor-capacitor (CLLC) resonant converter is a key component in electric power conversion systems, used for interfacing with dc voltage buses in applications such as renewable energy sources, battery energy storage in electric vehicles (EVs), and dc microgrids. It is favored for its bidirectional power transfer, high power density, zero-voltage switching (ZVS) for primary power switches, and soft commutation for output rectifiers. However, a significant drawback of the CLLC converter is the high operating frequency at light loads, leading to increased switching losses and reduced efficiency. To overcome this problem, this article introduces a hybrid CLLC converter that can dynamically switch between full-bridge (FB) and half-bridge (HB) configurations, as well as adjust the resonant frequency based on load conditions. This hybrid approach allows the converter to operate in an HB configuration and adjust its resonant frequency, reducing the switching frequency during light-to-medium loads and thus enhancing operating efficiency. A prototype with a 2-kW power rating, designed to connect a 400-Vdc bus to an 800-Vdc bus, was tested. The experimental results confirmed the proposed converter’s effectiveness, demonstrating improved efficiency under light-to-medium load conditions.
Tran et al. (Mon,) studied this question.