Key points are not available for this paper at this time.
The commercialization of supercapacitors hinges critically on developing low-cost electrode materials capable of simultaneously delivering high energy density and long-term stability. To address this challenge, we developed a dual‑nitrogen doping strategy using tris(hydroxymethyl)aminomethane (Tris) and urea to fabricate three-dimensional nitrogen-doped graphene (URNG) through a one-step hydrothermal process. Characterization of the material reveals that the optimized nitrogen conformation of URNG has a 2.07 % increase in pyrrole-N content compared to single nitrogen-source doped graphene (NG), a change that significantly enhances the charge storage capacity while maintaining structural integrity. Electrochemical measurements demonstrate that the assembled symmetric supercapacitor achieves a high energy density of 57.2 Wh·kg −1 at a power density of 670 W·kg −1 . The URNG electrodes deliver a specific capacitance of 194.2 F·g −1 at 0.5 A·g −1 (17.1 % higher than NG) while maintaining 87 % capacitance retention after 5000 cycles. The practical applicability of this material was successfully demonstrated by powering a 1.8 V LED device. This work not only provides a facile synthesis strategy but also offers fundamental insights into nitrogen configuration control for advanced energy storage systems. • Dual Nitrogen Source Synergistic Doping Strategy Breaks Through Traditional Nitrogen Doping Efficiency Bottlenecks. • Pyrrolic Nitrogen-Dominated Pseudocapacitance Enhancement Mechanism Revealed. • Synergistic Realization of Low-Cost Preparation and High Specific Capacitance Performance. • Dual Breakthroughs in Long-Term Cycling Stability and Practical Device Validation.
Liu et al. (Wed,) studied this question.