Answers are grounded in this paper and cite their sources.
Evaluates burning rate constant of polymers under controlled pressures, suggesting a new measurement method.
The classical d 2 -law, originally developed for liquid droplet burning, is often used to estimate the burning rate constant ( K ) of solid polymers from the decay of the squared geometric diameter. However, bubble activity in thermoplastic combustion can distort the apparent diameter thereby affecting geometry-based K measurements. In this study, a mass-based equivalent-diameter method was developed and applied to spherical polymethyl methacrylate (PMMA) burning under controlled sub-atmospheric pressures of 100 and 20 kPa. At 20 kPa, reduced buoyancy effects and soot radiation yield a more symmetric diffusion flame with mitigated bubble effects. Therefore, 20 kPa is prioritised for evaluating the burning rate constant K . Based on the mass loss rate and burning behaviour, the flaming period is divided into three stages (Stages I, II, III), and Stage II is selected as the optimal analysis interval because it is free from igniter-induced disturbances, sample sliding, and extinction-related effects. In Stage II at 20 kPa, the mass-based method yields an averaged K of 0.55 mm 2 /s, while the K ( t ) decreases gradually with time. A theoretical model analysis further highlights the mechanistic difference between liquid and solid burning. Liquid droplet burning is predominantly heat-transfer-controlled with a constant surface temperature, whereas solid-fuel regression is primarily Arrhenius-kinetics-controlled through the surface temperature. The analysis indicates that when the surface temperature varies only slowly, the mass flux of the solid fuel exhibits droplet-like characteristics, implying that the d 2 -law remains approximately valid over a limited interval. During this interval, the shrinking regression area drives a decrease in the total mass loss rate, leading to a time-decreasing inferred K ( t ). Overall, the mass-based method under reduced pressure provides a robust reference K for cross-study comparison.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: