Answers are grounded in this paper and cite their sources.
Study optimizes methylene blue removal in wastewater, highlighting bentonite's efficiency and reusability.
Using the Taguchi L9 orthogonal array, the study optimized the temperature, initial dye concentration, adsorbent dose, and pH, thereby significantly reducing the number of experiments while facilitating a thorough assessment of adsorption performance. Functional groups and morphological changes on the adsorbent surface during the adsorption process were confirmed by Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) studies. Taguchi signal‐to‐noise (S/N) ratio analysis revealed a trade‐off between system robustness and maximum adsorption capacity. The highest adsorption capacity (569.15 mg/g; S/N ratio of 55.10) was achieved at an initial dye concentration of 300 mg/L, an adsorbent dosage of 0.15 g/L, a temperature of 30°C, and a pH of 9. Analysis of variance (ANOVA) revealed temperature as the most significant factor influencing adsorption efficiency. Additionally, two techniques were used to regenerate the adsorbent: a solvent‐based approach using ethanol and a pH‐adjustment step. When using an 80% ethanol solution, the regeneration efficiency was 19.59%, while it was 17.47% at pH 2. Overall, this study presents an effective methodological framework that incorporates bentonite's high adsorption potential and reusability for the removal of cationic dyes. Taguchi optimization, mechanistic analysis, and regeneration studies, offering scalable and practical solutions for industrial wastewater treatment applications.
No takes yet. Share an insight, caveat, or question.
Parashar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: