Answers are grounded in this paper and cite their sources.
Demonstrates sensitive nucleic acid detection using a microfluidic platform in resource-limited settings, indicating potential for widespread diagnostics.
Sensitive, portable, and low-cost nucleic acid detection without need for complicated equipment or trained operators, allows flexibility in forward (i.e., near the point of collection) detection and diagnostics that could be applied in resource-limited settings. To this end, we developed a microfluidic, chip-based laser-induced graphene (LIG) heater with precise temperature control for loop-mediated isothermal amplification (LAMP) of DNA or RNA and subsequent CRISPR/Cas9-based molecular interrogation. Detection was pursued using commercial lateral flow assays (LFAs) and an ultrasensitive electrochemical module that utilizes Hexaammineruthenium (III) chloride (RuHex) as a redox probe. Using LIG-based LAMP amplification we were able to amplify and detect targets in samples with as low as 5 copies per 10 μL. We also evaluated post amplification products to determine the threshold amount of analyte required to enable detection. Our device demonstrated detection limits of 1011 for LFA and 5 × 10⁶ copies μL⁻¹ for the electrochemical platform. An integrated Arduino-based control unit was developed for housing the amplification and detection components of the diagnostic suite, such that it operates solely on smartphone power with steady-state power consumption of approximately 130 mW for the LIG heater. The approach represents a low-cost, low-power diagnostic platform with potential for point-of-care application.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: