Answers are grounded in this paper and cite their sources.
Demonstrates enhanced 4D printing performance in composites, indicating a breakthrough in biomedical applications.
Conventional poly( l ‐lactic acid) (PLLA) exhibits a relatively high switching temperature, limiting its on‐demand actuation under mild biomedical conditions. Herein, poly( l ‐lactide‐co‐ε‐caprolactone) (PLCL) was incorporated into PLLA to improve chain mobility and elasticity, and (MWCNTs–ZnO)@polydopamine nanoparticles (CZP) were introduced to construct a near‐infrared (NIR)‐responsive photothermal shape‐memory system. The resulting PLLA/PLCL/CZP composites showed improved crystallinity, mechanical performance, and light‐triggered actuation. At 1 wt% CZP, the film exhibited optimal tensile properties, with a tensile strength of 24.5 MPa and an elongation at break of 373%. Under 808 nm NIR irradiation, the composites rapidly recovered their original shape at approximately 55°C, enabling remote and mild‐temperature actuation. Direct‐ink‐written 4D‐printed scaffolds displayed high print fidelity and enhanced compressive properties, with 3 wt% CZP reaching a compressive strength of 5.2 MPa and a modulus of 0.6 MPa at 40% strain. The scaffolds showed shape‐fixity ratios above 95% and recovery ratios above 80%. Biological evaluations revealed acceptable initial cell adhesion, concentration‐dependent cytocompatibility, and antibacterial activity against E. coli and S. aureus . This work provides a tunable platform for NIR‐triggered shape‐memory actuation and programmable 4D‐printed biomedical scaffolds.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: