Answers are grounded in this paper and cite their sources.
Explores the effects of multilayer architecture on corrosion resistance in silicon substrates, suggesting enhanced stability and performance.
In this study, cathodic arc deposition was employed to synthesize CrAlN/TiSiN nanostructured multilayer coatings on silicon wafer substrates. The effects of the multilayer architecture on the microstructure and corrosion resistance of the coatings were systematically investigated. The structural characteristics and performance of the deposited films were analyzed using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and electrochemical polarization measurements. The experimental results demonstrate that various CrAlN/TiSiN multilayer configurations were successfully deposited, forming dense multilayer coatings with a thickness of approximately 1–2 μm and a dominant FCC β1-NaCl crystalline structure. The presence of nanostructured multilayer interfaces effectively inhibited columnar grain growth and contributed to microstructural refinement. XRD analysis revealed competitive growth between the (111) and (200) crystallographic orientations, indicating that the crystallization behavior is influenced by the interplay between surface energy minimization and strain energy accumulation. Contact angle measurements showed that all the coatings exhibited water contact angles exceeding 90°, indicating hydrophobic characteristics and potential anti-fouling capacity. In particular, the CrAlN outer layer structure presented lower surface free energy, which further enhances the coating system’s anti-fouling capacity. Electrochemical polarization results indicate that the corrosion current density of all the coatings remained in the order of 10−7 A/cm2, demonstrating excellent chemical stability. Overall, the CrAlN/TiSiN nanostructured multilayer coatings exhibit pronounced interface strengthening and densification growth mechanisms, which effectively enhance the chemical stability of silicon-based material surfaces. These results could provide valuable insights for the structural design and optimization of high-performance protective coatings.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: