Answers are grounded in this paper and cite their sources.
Experimental investigation demonstrates enhanced ductility and flexural capacity in composite beams indicating improved structural performance.
Studies indicate that combining ultra-high-performance concrete (UHPC) with normal concrete (NC) has gained significant popularity for enhancing the safety and toughness of reinforced concrete members. The significant difference in material properties between UHPC and NC could lead to issues such as debonding between the two layers. This paper presents an experimental investigation on composite beams subjected to cyclic loading which comprising two outer UHPC layers and an inner high strength concrete (HSC) core. Experimental results demonstrate that the composite beams exhibit considerable ductility compared to pure UHPC beams and higher flexural capacity relative to conventional reinforced concrete (RC) beams. Numerical simulations of the cyclic behavior of these beams were also conducted, and the results align closely with experimental data. A parametric study examined the influence of UHPC strength grade, the interface behavior between UHPC and HSC, and the height ratio of the UHPC layers. The findings reveal that increasing the UHPC strength enhances the flexural capacity of the composite beams up to a certain point; beyond this, further increases result in a reduction in capacity. Similarly, raising the UHPC height ratio improves load capacity markedly until a threshold is reached, after which additional increases yield negligible gains in flexural performance. Both experimental and numerical analyses indicate that superior combination of material strength and layer proportion in UHPC–HSC–UHPC beams can significantly improve bending performance while maintaining cost efficiency.
No takes yet. Share an insight, caveat, or question.
Feng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: