Answers are grounded in this paper and cite their sources.
Demonstrates high rectification efficiency in battery-free IoT networks, indicating potential for power stability.
Microwave wireless power transfer (MWPT) is a promising technology for powering dedicated industrial Internet of Things (IoT) devices, enabling battery-free operation. However, in realistic MWPT deployments, the received RF signals fluctuate drastically due to varying transmission distances and multipath fading. Additionally, the equivalent impedance of sensor nodes varies significantly during duty cycles, shifting between a low-resistance active state and a high-resistance sleep state. Consequently, maintaining high rectification efficiency under these dynamic conditions remains a critical challenge. This paper proposes a high-efficiency rectifier with a wide input power and load range based on the suppression of second and third harmonics. The rectifier adopts a dual-diode parallel configuration. By leveraging the impedance compensation characteristics of two short-circuited stubs with distinct electrical lengths, it simultaneously achieves fundamental-frequency impedance matching and harmonic suppression without the need for an additional matching network. Validated through theoretical derivation, simulation analysis, and physical prototype testing, the proposed 2.45 GHz rectifier realizes high-efficiency rectification over a wide dynamic range. Experimental results demonstrate that the power dynamic range reaches 10 dB when the rectification efficiency exceeds 70%, and extends to 17 dB when the efficiency is above 60%. Furthermore, the rectification efficiency is insensitive to load variations (100–1200 Ω), making it highly suitable for powering wireless sensor nodes with varying operating modes in complex electromagnetic environments.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: