Answers are grounded in this paper and cite their sources.
Investigates deformation and resistivity of loess under dry-wet cycles, suggesting implications for road stability.
Compacted loess is widely used as road subgrade filling in northwestern China, but its stability is threatened by traffic loads and repeated dry–wet cycles, leading to subgrade settlement or collapse. This study investigated the compression and resistivity characteristics of Q3 Malan loess under 0–3 dry–wet cycles by incremental loading (IL) and constant rate of strain (CRS) tests. A self-developed consolidation chamber was used for the IL and CRS tests with the simultaneous monitoring of deformation and resistivity, with the moisture content controlled within the range of 1% to 29% to 15%. The results showed that loess compressibility increased rapidly after the first dry–wet cycle and became slow after other dry–wet cycles; The primary compression index Cc and secondary compression index Cα rose as vertical stress increased, and Cα stabilized at a vertical stress larger than 200 kPa. Resistivity decreased with stress and cycles, and sharply decreased after the first cycle (enhanced pore connectivity) and stabilized after two to three cycles, matching the compression stages. The compression and resistivity characteristics obtained by IL and CRS tests had consistent variation rules, confirming the reliability of the tests. This study provides a preliminary laboratory theoretical basis for exploring the feasibility of using resistivity in subgrade deformation monitoring.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: