Answers are grounded in this paper and cite their sources.
Quantitative conversion of 1-butene to a Schultz−Flory distribution of oligomers has been accomplished by use of Group 4 transition-metal catalysts in the presence of methylaluminoxane (MAO). The oligomerization reaction was carried out at ambient temperature in a sealed reaction vessel with complete conversion of 1-butene at catalyst turnover numbers of >17 000. The combination of high catalyst activity without concomitant production of high polymer led to a highly efficient production of new hydrocarbon jet fuel candidates. The reaction proceeds with high regioselectivity; however, because achiral catalysts were used, several diastereoisomeric structures were produced and observed in the gas chromatography−mass spectrometry (GC−MS) chromatograms. The single and specific dimer formed in the reaction, 2-ethyl-1-hexene, was easily removed by distillation and then dimerized using acid catalysis to afford a mixture of mono-unsaturated C16 compounds. Changes in the oligomerization catalyst led to production of fuels with excellent cold-flow viscosity without the need for a high-temperature distillation. Thus, removal of the dimer followed by catalytic hydrogenation (PtO2) led to a 100% saturated hydrocarbon fuel with a density of 0.78 g/mL, a viscosity of 12.5 cSt at −20 °C (ASTM 445), and a calculated heat of combustion of 44+ MJ/kg. By back-addition of hydrogenated dimer in varying amounts (6.6, 11.5, and 17 wt %), it was possible to tailor the viscosity of the fuel (8.5, 7, and 6.5 cSt, respectively).
No takes yet. Share an insight, caveat, or question.
Wright et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: