5 V driving organic non-volatile memory transistors with poly(vinyl alcohol) gate insulator and poly(3-hexylthiophene) channel layers

Organic non-volatile memory devices were fabricated by employing organic field-effect transistors (OFETs) with poly(vinyl alcohol) (PVA) and poly(3-hexylthiophene) as a gate insulating layer and a channel layer, respectively. The 10-nm-thick nickel layers were inserted for better charge injection between the channel layer and the top source/drain electrodes. The fabricated PVA-OFET memory devices could be operated at low voltages (≤5 V) and showed pronounced hysteresis characteristics in the transfer curves, even though very small hysteresis was measured from the output curves. The degree of hysteresis was considerably dependent on the ratio of channel width (W) to channel length (L). The PVA-OFET memory device with the smaller W/L ratio (25) exhibited better retention characteristics upon 700 cycles of writing-reading-erasing-reading operations, which was assigned to the stability of charged states in devices.