Answers are grounded in this paper and cite their sources.
Examines cutting performance in aluminum honeycomb structures, suggesting improved machining outcomes through ultrasonic assistance.
Aluminum honeycomb structures are widely used in aerospace due to their excellent stiffness-to-weight ratio. However, their thin-walled architecture makes them difficult to machine, leading to deformation, material buildup, tool wear, and surface degradation. This study analyzes ultrasonic vibration-assisted milling of aluminum honeycomb structures by combining 3D numerical modeling and experimental validation. A finite element model using Abaqus/Explicit, based on the Johnson–Cook law, is developed to simulate tool-material interactions and chip formation. A parametric analysis was conducted to evaluate the influence of the vibration mode (longitudinal and longitudinal-torsional), vibration amplitude, feed rate, tool inclination angle, and number of teeth. The results show that ultrasonic vibrations significantly improve machining conditions. The longitudinal-torsional mode reduces cutting forces by 10 to 25%, while increasing the vibration amplitude can lead to a reduction of up to 50% for F x and F y and 55% for F z . Furthermore, vibration assistance promotes chip fragmentation, reduces tool-material contact pressure, limits sticking wear, and decreases cell wall deformation, thus contributing to improved surface quality. These results demonstrate the potential of ultrasonic vibration-assisted milling to optimize the machining of honeycomb structures in demanding industrial applications, particularly in the aerospace field.
No takes yet. Share an insight, caveat, or question.
Beldi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: