Answers are grounded in this paper and cite their sources.
Demonstrates enhanced performance in EPDM/PP blends with maleic anhydride-grafted polypropylene, suggesting better applications in thermoplastic elastomers.
This study investigates the effect of incorporating maleic anhydride-grafted polypropylene (PP-g-MA) as a compatibilizer on the morphological, thermal, and mechanical properties of EPDM/PP blends reinforced with clay powder for thermoplastic elastomer applications. PP-g-MA was prepared by refluxing in xylene, and EPDM/PP blends were prepared using the same procedure, incorporating PP-g-MA as a compatibilizer and clay powder as a filler at various loadings (0, 5, 10, 20, 30, 40 phr). The unmodified blends exhibited poor morphology due to phase incompatibility. In contrast, the addition of PP-g-MA significantly improved the dispersion of clay particles, resulting in a more homogeneous microstructure. The compatibilizer also enhanced mechanical performance, particularly tensile strength and elongation at break. Fourier-transform infrared (FTIR) spectroscopy confirmed the presence of hydrogen bonding between silica and PP-g-MA, while thermogravimetric analysis (TGA) indicated the highest thermal stability at 528.23 °C with a residue mass of 34.33%. These findings demonstrate the effectiveness of PP-g-MA in enhancing the overall performance of clay-reinforced EPDM/PP blends as thermoplastic elastomers.
No takes yet. Share an insight, caveat, or question.
Siregar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: