A Diachronic View on Fulling Technology in the Mediterranean and the Ancient Near East: Tools, Raw Materials and Natural Resources for the Finishing of Textiles

Among the operations required in the overall cycle of the ancient production of textiles, Greek and Roman sources refer to the fulling of woollen fabrics as the most complex and expensive technical process performed both in the 1st millennium BC and the 1st millennium AD. Indeed, the finishing of woollen clothes needed a large amount of time, energy and labour, as well as involving the use of specialized skills and costly raw materials. Fulling fulfilled two functions that were necessary for the proper finishing of cloth, namely the scouring and consolidation of the fibres in the fabric. Woven cloth straight from the loom has a rather open, loose texture and the woven threads needed closing or tightening. The fulling process was intended to consolidate and thicken the structure of the fabric by matting the fibres together more thoroughly and by shrinking them. Thus the process transformed the cloth from a loose ‘net’ of threads into a compact, tight, textural whole. This is why in ancient economies, fulled textiles, proof against water and the wear inflicted by weather and time, were considered among the most luxurious and prestigious of fabrics. Textual, iconographical and archaeological evidence from the Greek and, especially, Roman civilizations provide together quite a complete picture of the procedures, the tools and the raw materials involved, with special emphasis on their natural and geographical origins.1 In contrast, for pre-Classical fulling, archaeological and epigraphical evidence on the technical phases in the finishing of textiles are unfortunately very scanty, deficient and often of doubtful interpretation. This situation applies to Mesopotamia too. Here the earliest cuneiform texts related to the finishing of woollen textiles date back to the end of the 3rd millennium BC, while seals and sealings representing scenes of fullers at work attest the presence of this technology even around the middle of the 4th millennium BC according to some historians. 2 In fact the terminology of the cuneiform texts limits itself to the name of the textile workers involved, the woollen fabrics undergoing the different operations, and a few raw materials, but they do not describe how technical operations were carried out and the sources of the materials the fullers utilized. Therefore, the study of natural resources mentioned in 1st millennium Classical texts is extremely useful: it helps first to close the loopholes in both earlier and contemporary cuneiform documentation, and then to better understand the economic and cultural