Answers are grounded in this paper and cite their sources.
Investigates mechanical properties of cement sheath for hot dry rock geothermal wells, suggesting better stability.
Interface debonding between the casing and cement sheath (CC interface) is a major cause of wellbore failure in hot dry rock geothermal wells. By adding iron filings to cement and varying their distribution along the radial direction, a cement sheath with gradient mechanical properties is obtained. This sheath is called a functional gradient cement sheath. In this paper, a theoretical mechanical model of the functional gradient cement sheath is established. Its mechanical parameters are obtained from laboratory experiments. Analytical solutions for the stress and displacement fields of the casing–functional gradient cement sheath–formation system are derived using elastic thick-walled cylinder theory. The effectiveness of the functional gradient cement sheath in preventing CC interface debonding is then studied. The results indicate the following: (1) cement block samples containing iron filings were prepared with particle sizes of 0.5 mm, 1 mm, and 2 mm and with iron filing-to-cement mass ratios of 0%, 10%, 20%, 30%, and 40%. The compressive strength and elastic modulus of these samples both varied with the iron filing content. As the iron filing content increases, the compressive strength and elastic modulus generally increase, but they decrease under certain conditions. (2) With the total mass of iron filings fixed, the influence of different elastic modulus distributions (exponential, linear, quadratic parabolic, and uniform) on the functional gradient cement sheath was investigated. It was found that the quadratic parabolic distribution of the elastic modulus yields the best mechanical properties. (3) The influence law of the size and dosage of iron filings on the functional gradient cement sheath was studied. Based on the experimental data (0%, 10%, 20%, 30%, 40%), three representative contents (15%, 30%, 45%) were selected for theoretical analysis. It was found that when the iron filing size was 0.5 mm and the dosage was 15%, the stress and displacement on the inner wall of the functional gradient cement sheath were the minimum.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: