Answers are grounded in this paper and cite their sources.
Shows effects of fracture roughness and temperature on cesium retention in granite, suggesting critical assessment for waste management.
To elucidate the substantive role of fracture-surface roughness in radionuclide retention under repository-relevant thermos-chemical conditions, this study investigates Beishan granite and systematically examines Cs sorption ( K d ) of powder and fractured-rock specimens in a static batch system across 298–363 K and 10–60 mmol/L NaCl. Fracture roughness is quantified by the Joint Roughness Coefficient ( JRC ) and cross-validated using the real surface area derived from 3D morphology scanning. On this basis, a unified SMR (Structure–Mechanism–Response) model is developed and calibrated to incorporate the coupled effects of structure ( JRC /surface area), temperature, and ionic strength within a single predictive framework. Results show that, at 298 K and 10 mmol/L, the K d of powder samples is markedly higher than that of fractured samples (powder≈4.34 mL·g −1 ; fractured samples increase from ≈1.39 to ≈1.98 mL·g −1 as JRC =3.56→9.59), indicating that enhancing roughness effectively improves retention in fractured rock. However, when NaCl concentration rises to 60 mmol/L, this gain is markedly suppressed ( K d in the high- JRC group drops to ≈1.02 mL·g −1 ). Temperature consistently reduces K d over the full range: for every 25 K increase, typical decreases are 14%–23% for powders and 24%–40% for fractured samples; the inhibitory effect of ionic strength on K d is most sensitive in the low-salinity region. Two-factor analyses indicate that, within the present study domain, the combined effect of temperature×salinity can be approximated as multiplicative, with no stable “super-additive synergy” observed. The SMR model achieves a good unified fit for 3≤ JRC ≤10, 25–90°C, and 10–60 mmol/L, enabling scenario-based prediction within the calibrated experimental range. The findings suggest that site assessment should prioritize management of the thermal regime and hydrochemical conditions, and incorporate the roughness-induced gains in sorptive retention, particularly within low-temperature, low-ionic-strength envelopes. Parameter selection should not directly extrapolate from powders to fractured rock; instead, fractured-rock measurements or SMR-corrected parameters should be used to avoid systematically overestimating repository-scale retention.
No takes yet. Share an insight, caveat, or question.
Meng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: