Answers are grounded in this paper and cite their sources.
Examines underwater adhesion in rough-soft and smooth-hard surfaces, suggesting new insights on adhesion mechanisms.
Improvement of underwater adhesion requires removal of interfacial water to enable intimate contact between surfaces. System parameters such as surface chemistry, elastic modulus, and surface roughness directly influence the nature of this contact. Although thermodynamic arguments suggest that hydrophobic surfaces should exhibit higher adhesion underwater than in dry conditions, nanoscale rigid roughness has been shown to trap water and significantly suppress underwater adhesion. In this work, we measure adhesion between rough–soft and smooth–hard hydrophobic surfaces and compare the results with predictions from the conformal contact mechanics model of Persson and Tosatti (P–T). We find that the conformal P–T model agrees well with dry experimental data and is insensitive to which surface is rough. In contrast, for underwater contacts, adhesion during approach is substantially lower for rough–soft elastomers than predicted by the conformal P–T model. Using infrared microscopy, optical modeling, and surface-sensitive spectroscopy, we demonstrate that these contacts are non-conformal and that a nanometer-thick layer of trapped water persists at the interface. A previously proposed modified P–T model accounting for non-conformal contact has successfully explained underwater adhesion for rough rigid surfaces with an average dry contact fraction of 0.44. However, the reduction in adhesion is significantly larger for the rough–soft surfaces studied here. Fitting our data with a non-conformal P–T model using the average dry fraction as a fitting parameter yields substantially lower values (approximately 0.24). Interestingly, during retraction, we observe the opposite trend, with pull-off adhesion exceeding theoretical predictions based on conformal contact. These results highlight the coupled roles of surface roughness and elastic modulus in regulating interfacial water removal and underwater adhesion, with potential implications for engineered and biomedical adhesive systems.
No takes yet. Share an insight, caveat, or question.
Patil et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: