Key points are not available for this paper at this time.
High-gain DC-DC converters are becoming increasingly popular in renewable energy applications and solar PV systems. This article introduces a non-isolated non-coupled inductor-based high-gain DC-DC boost converter with the desirable features of low voltage stress on controlled power switches and high voltage gain at lower duty ratios. The proposed converter is well suited for boosting the low-input DC voltage obtained from distributed generation units like photovoltaic (PV) or fuel cells to substantially higher DC voltage. The converter comprises only two switches, and a single PWM signal governs its operation. These characteristics result in a topology that is more compact, less costly, lighter weight, and easier to control. The proposed converter is compared with some previously developed topologies of high-gain boost converters across various performance parameters. This comparison illustrates that the proposed model surpasses them in every aspect. A 300 W hardware prototype of a proposed model is developed and tested in a laboratory environment to confirm the theoretical assertions of a proposed model. The proposed topology offers a promising solution and enables a high gain of approximately 12 times the input voltage at a smaller duty ratio, specifically 11.25 at a duty of 0.6 and 17.77 at a duty of 0.7. The efficiency of a proposed converter ranges between 92.5% to 94.5% making it appropriate for numerous medium-high power applications. The uniqueness of the suggested system is its simple design and greater efficiency, which provides a more considerable gain and higher output voltages for sustainable energy systems.
Lin et al. (Mon,) studied this question.