Answers are grounded in this paper and cite their sources.
Examines how calcium sulfoaluminate cement enhances concrete adhesion over time.
The interfacial adhesion between fresh concrete and a substrate is crucial for printcrete linings in mountain tunnels. The interfacial adhesion is time‐dependent and can evolve quickly when the concrete is in a fresh state. This study examines the impact of adding calcium sulfoaluminate (CSA) cement on the time‐dependent interfacial adhesion. The dosages of CSA cement include 0%, 2%, 4%, and 6% by mass of binder. After various periods of rest, the interfacial adhesion is quantified by applying tensile or shear stresses to the interface until debonding occurs. The resting times range from 1 to 32 min after the formation of the interface. Fast tack tests (FTTs) and fast shear tests (FSTs) were conducted to quantify the time‐dependent interfacial adhesion subjected to tensile stress and shear stress, respectively. The results showed that the increase in resting time and the addition of CSA cement can significantly enhance interfacial adhesion. A time‐dependent interfacial maximum tensile stress model and a time‐dependent interfacial maximum shear stress model were established. The models quantify the effect of the hydration degree of the cementitious materials and the replacement ratio of CSA cement on the interfacial adhesion. The models were validated by comparing the calculated results with the test results.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: