Answers are grounded in this paper and cite their sources.
Study evaluated the impact of copper slag and steel fibers on mechanical properties of geopolymer composites, indicating fiber dependence on slag content.
This study evaluated the effects of copper slag (CS), dosed relative to the mass of fly ash (FA; CS = 0, 7.5, 15, and 22.5%), and the volume fraction of hybrid steel fibers (Vf = 0.0, 0.5, and 1.0%) on the mechanical response of an alkali-activated geopolymer composite. The tests were performed using a two-factor CS × Vf design (4 × 3), with compressive strength (fc) and splitting tensile strength (fct.sp) determined as the response variables. Statistical analysis showed significant effects of CS, Vf, and CS × Vf on fc, and a significant CS × Vf interaction for fct.sp, confirming that the fiber effect depended on the CS content. The greatest increases in fc relative to fiber-free composites were obtained for CS = 7.5%: +73% (Vf = 0.5%) and +102% (Vf = 1.0%), and for CS = 22.5%: +75% (Vf = 1.0%). For fct.sp, a decrease was found at CS = 0% and Vf = 0.5% (−34%), whereas an increase was observed at CS = 22.5% and Vf = 1.0% (+49%). The interpretation of the mechanical response was extended by DIC-based strain analysis in compression and splitting tests, together with σct.sp–εx curves, indicating differences in strain/damage localization and post-cracking response.
No takes yet. Share an insight, caveat, or question.
Kaźmierowski et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: