Answers are grounded in this paper and cite their sources.
Investigates styrene carbonate synthesis in high-pressure CO2, suggesting optimal conditions for yield improvement.
This study investigated the synthesis of styrene carbonate via the cycloaddition reaction of CO 2 using styrene oxide as a feedstock. The investigation focused on high-pressure conditions, where reaction acceleration is expected due to the presence of high-pressure CO 2 , using a supported ionic liquid (SIL) catalyst where the ionic liquid is supported on silica. Specifically, the carbonate synthesis was conducted in a batch reactor under conditions of 100 °C and 130 °C and 1 MPa, 9 MPa, 12 MPa, and 30 MPa. Styrene carbonate yield and reaction rate constant increased in the order of 9 MPa or 12 MPa, 1 MPa, and 30 MPa. Calculations of the vapor-liquid equilibrium revealed that the phase composition differed at each pressure condition. At pressures from 1 MPa to 12 MPa, both yield and reaction rate constant were increased due to rising CO 2 concentration and expansion of the reaction space. However, at 30 MPa, the reaction rate decreased compared to 12 MPa due to dilution of the styrene oxide concentration accompanying the increase in reaction volume. Furthermore, the reaction was found to be promoted when the molar ratio of the reactants CO 2 and styrene oxide was 1:1. Additionally, in this system, it was suggested that the reaction rate constant decreases with increasing pressure because of the activation volume. Kinetic analysis confirmed that anions and the support affect the reaction rate constant.
No takes yet. Share an insight, caveat, or question.
Tatsushima et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: