Answers are grounded in this paper and cite their sources.
Investigates corrosion product evolution in 15Cr5MoVRE alloy under simulated conditions, indicating shifts in composition over time.
The 15Cr5MoVRE alloy, a commonly used material for oil well pipe, incorporates alloying elements including Cr, Mo, V, and rare earth elements (RE) to enhance its corrosion resistance in harsh environments and extend service life. In this paper, the evolution law of corrosion products on 15Cr5MoVRE well pipe was studied by indoor solution immersion method. The surface macroscopic morphology of the corrosion product film was observed by digital camera, the microscopic morphology of the corrosion product film was observed by field emission scanning electron microscope (SEM), and the structure and composition of the corrosion product were analyzed by X-ray diffractometer (XRD) and EDS. The average corrosion rate was calculated by the weight loss method. The results show that the average thickness of the corrosion product film increases progressively with prolonged exposure to the corrosive environment. The corrosion products primarily consist of CaCO₃ and Fe₃O₄,Cr₂O₃ appeared after 120 h of corrosion. Over extended corrosion periods, CaCO₃ content was gradually decreased, Fe₃O₄ and Cr₂O₃ content gradually increased; After 240 h of corrosion, continuous dense Fe₃O₄ and Cr₂O₃ corrosion products cover the whole surface of the matrix, playing a mechanical role between the solution and the matrix;The corrosion rates of test steel of 120 h, 240 h, 240 h and 360 h and 720 h were 0.0574 mm/a, 0.0646 mm/a, 0.0632 mm/a and 0.0527 mm/a, respectively. The corrosion rate increases first and then decreases, when corroded for 240 h. Its average corrosion rate reaches the maximum value.
No takes yet. Share an insight, caveat, or question.
LIU et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: