Deep Oxidation of Atmospheric VOCs by MOFs/Metal Sulfide Composites via Fenton-like Reaction: Performance and Mechanism

The catalytic removal of refractory VOCs in gas–solid reactions usually suffers from the formation of toxic byproducts and catalyst deactivation. The advanced oxidation process (AOP) wet scrubber has recently attracted interest in VOCs purification due to its high efficiency and inhibited gaseous byproducts emission. MOFs/metal sulfides (termed M50C50) were designed to activate peroxymonosulfate (PMS) for toluene removal in a wet scrubber. The heterojunction interface synergistically couples MIL-100(Fe) and CoS for dual functions, the M50C50 enabled the rapid transfer the toluene from the gas phase to the aqueous phase, where they were subsequently mineralized by SO4•− and •OH radicals. The primary active sites responsible for PMS activation were identified as reducing sulfur species, along with low-valence cobalt and iron species. Over 90% of toluene were removed with a wide pH range, while •OH and SO4•− were involved in the mineralization of intermediates. The process showed high mineralization efficiency (75% CO2 evolution) and effectively reduced the formation of toxic byproducts, underscoring its potential for minimizing secondary pollution risks. This work provides a novel route to designing composite catalysts for deep VOC oxidation via AOP wet scrubbers, greatly facilitating their use in environmental remediation.