Inverse-Designed Programmable Multi-Channel Wavelength Demultiplexers Based on Low-Loss Phase Change Material

We present a family of compact, programmable wavelength demultiplexers enabled by an etchless silicon nitride platform integrated with the low-loss phase-change material Sb2Se3. Using topology optimization (LumOpt) with a p-norm (p = 2) figure-of-merit defined over a 10 nm bandwidth, we design several devices within a common 24 × 24 μm2 design region: single-wavelength routers (1530, 1550, 1570, 1590 nm), two-channel (1550/1570 nm), three-channel (1530/1550/1570 nm), and four-channel (1530–1590 nm) coarse wavelength-division demultiplexers, all sharing the same input/output waveguide configuration. Simulation results show that all devices achieve low insertion loss at target wavelengths (peak transmission better than −1.21 dB across all channels), high average transmission over the respective 10 nm bands (typically within 0.1 dB of the peak), and suppressed crosstalk (worst case below −11.52 dB). Leveraging the reversible amorphous-to-crystalline phase transition of Sb2Se3 via laser pulses, all devices support post-fabrication reconfiguration, overcoming the static functionality of conventional etched photonic circuits. This work establishes a scalable, software-defined platform that combines inverse design and phase-change materials for high-density, reconfigurable wavelength-routing photonic integrated circuits.