Answers are grounded in this paper and cite their sources.
Investigates homogeneous solidification for yielding uniform inter-layer microstructures in 3D aerogels, suggesting improved manufacturing methods.
Freeze-casting-assisted direct ink writing (DIW) enables the fabrication of three-dimensional (3D) aerogel architectures with improved geometric versatility. However, multilayer deposition often produces inter-layer microstructural nonuniformity because the pre-frozen underlying layers introduce additional thermal resistance. To address this challenge, we investigated a homogeneous solidification strategy using a computational fluid dynamics (CFD) model. The framework incorporates a moving substrate boundary condition, constant-temperature thermal boundary, and interface tracking, while the nanocomposite ink properties are explicitly modeled as functions of temperature and shear rate. Using the CFD results and a custom digital image-processing algorithm, the freezing time required for the extruded filaments to fully solidify on a cold substrate is quantified. Based on the extracted freezing-time data, we determined the substrate-temperature pairs that yield identical freezing times across sequential layers. The resulting process map provides practical guidelines for mitigating layer-to-layer thermal variations and enables the reliable printing of aerogels with uniform inter-layer microstructures.
No takes yet. Share an insight, caveat, or question.
Son et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: